Specifications of complete rock fireplace frame
Plywood veneer finish
Width (mm) 1090
Height (mm) 1010
Depth (mm) 300
Width (mm) packaging (mm) 11380
Height of packaging (mm) 1110
Depth of packaging (mm) 400
Net weight (Kg) 35
Gross weight (Kg) 40
Specifications of the electric rock fireplace fireplace
- LED Flame
- Net weight 9 kg.3
- Gross weight kg 10.8
- Width (mm) 600
- Height (mm) 503
- Depth (mm) 150
- Built-in opening size (mm) 584 x 495
- Heating power (Watt) 1500
- Heating capacity (m2) 37
- Heating technology Nichrome heater fan
- Thermostat interval 17°C - 27°C
Characteristic rock stone fireplace
- Programmable heating program for 7 days
- Digital thermostat
- Electronic timer
- Open window detection
- Adjustable brightness
- Remote control
- LED flame technology
- Net weight (kg) 9,3
- Gross weight (kg) 10.8
- Packing width (mm) 660
- Packing height (mm) 560
- Packing depth (mm) 210
Some tips on servicing the electric rock fireplace
Check that the appliance is switched off and disconnected before cleaning the heater or the fireplace.
We recommend periodically vacuuming the fan/heater.
Remove dust with a clean, dry cloth.
Remove fingerprints and other marks from the glass screen using a clean damp cloth.
Do not use abrasive cleaners or liquid sprays on the surface of the window glass.
NOTTE: 13 amp, 240 volt circuit is required. A dedicated circuit is to be preferred but not essential. A dedicated circuit will be required if the switch trips or if the fuse blows regularly when the heater is running. Additional devices on the same circuit may overcharge the rated current of the switch.
WARNING: Do not use the firebox with normal extensions. If the cable is not long enough, it is possible to use only special extensions for a minimum of 13 Ampere
.