Infrared heating has now reached an unparalleled standard of quality and safety. We often recommend this type of heating to our customers depending on their needs. Suitable for all uses, whether commercial, industrial or domestic, they have an unparalleled range of application. Great savings of electricity and the sophisticated design sometimes make them real elements of furniture, both external and internal.
 |
 | |
| how to heat outdoor space | ||
| heat outdoor space | ||
| infrared wall heater | ||
| install heater | ||
| outdoor heater | ||
|
| |
| Simple installation and operation of an outdoor infrared streamer. | ||
|
WARMIBOX |
| |||||||||||
Simple installation and operation of an outdoor infrared streamer.Even outdoor spaces, if regularly used, should be heated optimally and economically. SINED has been offering intelligent and cost-effective solutions for years, in this case we present the new outdoor infrared heater CALDO-I-BOX. Modern, with a slim and elegant design, it is ideal for outdoor environments, optimised for bars and patios with 2000W adjustable power. With its IP65 protection rating it is suitable for all climates. It mounts IR-A short wave lamp with a life of 5000 hours to heat any of your outdoor spaces. Ideal for heating outdoor bars, commercial areas, terraces, gazebos, outdoor dining spaces, pergolas, patios, balconies, outdoor living spaces, verandas, common areas, etc. It has a remote control with timer and digital LED display and a bracket for hanging on the wall. Let`s see how to mount it 1 Mark three positions on the wall with the cardboard template for installation.  2 Drill three holes for the Ø6mm dowels in the wall using a suitable tool and insert the three dowels into the holes. Screw two screws (M5 x 30 mm) into holes 2 and 3 as follows and leave the screw head 2 mm outside the wall or anchorage.  3 Hook the bracket slot on the back of the heater as shown below over the two screwed screw heads (position 2 and 3)  4 Screw the M5 x 30 mm screw firmly into the dowel (position 1).  How does it work?  Connect the heater to a 230240V~ 5060Hz power socket. Set the rocker switch to position I: the heater starts to operate on high power but no indication appears on the display. Caution: The remote control cannot operate the heater at this stage 2 SWITCH-OFF MODES Connect the heater to an electrical outlet 230240V~ 5060Hz. Set the rocker switch to position O: the heater is switched off. 3 Operation with REMOTE CONTROL Connect the heater to an electrical socket 230240V～ ，5060Hz. Set the rocker switch to position II, the heater is switched on in standby mode. The " " symbol flashes. The distance between the heater and the remote control must be less than 3 metres and the remote control must be pointed directly at the receiver. All very easy and intuitive! Special features: Power 2000W, from the remote control you can select 3 power steps, 33% - 66% - 100%. Colour Silver and Black Low-glare short-wave IR-A lamp Ip65 protection Remote control with timer and digital LED display Wall bracket, wall installation, bracket included CALDO-I-BOX sined is the only heater that heats a larger area of the tables, with an asymmetrical infrared beam that avoids the risk of heating only the customers` heads and leaving their legs cold instead Some tips Cleaning - Disconnect the device from the power supply; - After the device has cooled down, the housing can be cleaned with a dry cloth; - Do not touch the lamp element with your fingers as stains may form from such contact. - Do not use abrasive or caustic cleaning agents! - Never immerse the device in water! Danger of death! 
| |||||||||||||
|
| ||||||||
| |||||||||
 |
 |
||||||||||||||||||
| |||||||||||||||||||
 |
 |
||||||||||||||||||
